Manual Water Quality Sampler
JC-DX-80 Hand Crank Groundwater Sampler
JC-DX-80 Hand Crank Groundwater Sampler

JC-DX-80 Hand Crank Groundwater Sampler

JC-DX-80 hand crank groundwater sampler, designed for in-situ sampling in monitoring wells with diameter 80mm. 500ml sampling bucket, standard 30m steel wire rope, depth customizable. Fully mechanical, no power supply needed, ideal for VOC, heavy metal, oil and microbiological groundwater sampling in site investigation, hydrogeology and environmental remediation projects. Lightweight, easy to carry for field work.

Product Introduction

Technical Parameters

Product Video

Procurement Guide

The JC-DX-80 Groundwater Sampler is a **portable, hand-cranked borehole groundwater sampling device** designed specifically for small-diameter monitoring wells and groundwater boreholes. It is compatible with monitoring wells with a borehole diameter of ≥80 mm. The sampling bucket is lowered using a hand-cranked winch and steel wire rope to collect in-situ groundwater samples. It complies with groundwater environmental monitoring sampling standards and is widely used in scenarios such as groundwater pollution investigations, soil and groundwater remediation, mining, environmental impact assessments, third-party testing, and hydrogeological surveys.


Operating Principle

The entire unit consists of a hand-cranked hoist winch, a self-locking mechanism, a steel wire rope, a sampling bucket, and a base support. The sampling bucket is lowered to the target water level in the well using the hand-cranked winch, allowing water to enter the bucket. Once in position, the self-locking mechanism engages to seal the water sample as the bucket is raised, bringing the in-situ groundwater sample directly to the surface. **No pump or power source is required**, which prevents contamination from pump hoses and air bubbles from disturbing the sample. It is suitable for collecting groundwater samples for heavy metals, VOCs, physicochemical parameters, and microbiological analysis.


Product Highlights

✅ **Compatible with small-diameter monitoring wells**: Suitable for groundwater monitoring wells with a bore diameter of ≥80 mm and routine in-situ sampling in deep wells; differs from surface water samplers used in rivers and lakes

✅ **304 stainless steel body + PVC sampling bucket**: Corrosion-resistant and unlikely to leach contaminants, reducing sample interference; capable of collecting freshwater, slightly acidic or alkaline groundwater, and oil-contaminated groundwater

✅ **Hand-cranked self-locking winch design**: Features a self-locking hook for controlled lowering and lifting, preventing the bucket from falling; can be operated by a single person in the field without an external power source

✅ **Comes standard with a 30-meter sampling rope; depth is customizable**—steel wire rope can be extended as needed to meet sampling requirements for wells of varying depths

✅ **Lightweight and portable**, comes with a stand base for quick on-site setup and easy storage; ideal for field sites without power or for field surveys

✅ **Multi-purpose**—in addition to groundwater, it can be used for spot sampling in lakes, rivers, and shallow seas, and is capable of collecting both water and oil samples

✅ **Compatible with a wide range of testing parameters**: groundwater sampling and testing for physicochemical indicators, heavy metals, ammonia nitrogen, total phosphorus, VOCs, microorganisms, petroleum hydrocarbons, and more


Applicable Industry Scenarios

Groundwater environmental monitoring, contaminated site investigations, soil remediation projects, geological and hydrogeological exploration, mine groundwater monitoring, environmental impact assessment testing, third-party CMA testing laboratories, water resources surveys, and groundwater hazard monitoring at gas stations.


Brief Operating Instructions

Set up the support stand to secure the equipment, connect the steel wire rope to the sampling bucket, and use the hand-crank winch to lower it to the target depth. Once the sampling bucket is filled with water, engage the self-locking mechanism and crank it back up at a steady speed. Remove the water sample and transfer it to a sample bottle. After use, rinse the bucket with clean water, let it air dry, and store it to prevent corrosion from silt and sand.



Technical Specifications

- Model: JC-DX-80

- Sampling Method: Hand-cranked semi-automatic steel wire rope sampling

- Single-sample Volume: 500 ml

- Standard rope length: 30 m (custom lengths available)

- Sampling bucket specifications: Φ53 mm × 395 mm

- Suitable boreholes: Monitoring wells with a bore diameter ≥ 80 mm

- Main materials: 304 stainless steel winch bracket; sampling bucket made of stainless steel + PVC

- Operating temperature: -5°C to +50°C; suitable for all-weather field use

- Total weight: Approx. 6 kg

- Components: Hand-crank hoist, self-locking mechanism, steel wire rope, sampling bucket, bracket base



Previous Page: JC-800B 304 Stainless Steel Depth Water Sampler

Next page: JC-800 Clear Acrylic Layered Water Sampler

Any comments are welcome!

+86 15589812388

lb045008@loobo.cn

Jinling Industrial Park, Chengyang District, Qingdao City, Shandong Province, China

Copyright © 2026 Qingdao Lubo Group Co., Ltd All rights reserved Privacy

powered by WDL